HOME CARE NEEDLING ROLLERS

GENOSYS REJUVE VIBRATING ROLLER

(detachable roller head)

The Rejuve vibrating detachable roller vibrates 6,000 times per minute, stimulating and trigging deepest points into the skin layers, creating less pain during treatment. The vibrations increase absorption of serums into the skin.

Specifications:

Clinical Models Needle Length size: 0.25mm, 540 needles per head
Medical grade stainless steel needles.
Disk needle type secure 100% safety form pin-off risk during the procedure.
The detachable roller head is changeable. This system allows an economical and hygienic system.
Ergonomic handle

GENOSYS BODY ROLLER

(detachable roller head)

Genosys Body Roller is a handheld rollerball with a double nozzle cosmetic device for non-invasive technique that encourages the production of fibroblast and epidermal growth factors for correcting the aesthetic imperfections of the skin of the body.

Regular procedures allow you to get rid of such serious problems as stretch marks, scars, scars, reduced skin tone, cellulite.

Specifications:

Clinical Models Needle Length size: 0.5mm, 450 needles per head (two heads total 900 needles).
Medical grade stainless steel needles.
Disk needle type secure 100% safety form pin-off risk during the procedure.
The detachable dual roller head is changeable. This system allows an economical and hygienic system.
Ergonomic handle

GENOSYS CHANGEABLE HEAD SYSTEM

The heads are changeable for Detachable manual roller, Rejuve model (Vibrating Roller), Body Roller. This system allows an economical and hygienic system

GENOSYS MICRONEEDLING ROLLERS

MECHANISM OF MICRONEEDLING

TDS (Transdermal Delivery System)

Due to the protective function of skin barrier and the big molecular size of ingredients, approximately 99.7% of the applied or sprayed nutritive elements cannot pass through the stratum corneum, which is the outermost layer of the skin, but remain on the skin and finally disappear, and only about 0.3% of the applied or sprayed nutritive elements can infiltrate into the skin. To solve this problem and increase penetration, microneedle rollers are designed to create physi-cal pathways through the skin to increase skin permeability and allow delivery of active ingredients.

Natural Collagen Induction

Microneedling results in the natural response to wounding of the skin, even though the wound is minute and mainly subcutaneous. A single needle prick through the skin would cause an invisible response. When the needle penetrates into the skin, this injury, minute as it might seem, causes some localized damage and bleeding by rupturing fine blood vessels. Platelets are automatically released and the normal process of inflammation commences, even though the wound is miniscule. A completely different picture emerges when thousands or tens of thousands of fine pricks are placed close to each other and one gets a field effect, because the bleeding is virtually confluent.
This promotes the normal post-traumatic release of growth factors and infiltration of fibroblasts. This reaction is auto-matic and produces a surge of activity that inevitably leads to the fibroblasts being ‘instructed’ to produce more colla-gen and elastin. (Dr. Desmond Fernandes, Minimally Invasive Percutaneous Collagen Induction)

Disk Needle Roller

Conventional microneedle rollers are problematic as it is almost impossible to securely or closely assemble the circular disks with each other such that the disks are not undesirably moved, so the conventional skin stimulator cannot effectively stimulate the skin and the needles may be broken at the tips. Further, the broken tips of the needles may cause severe injuries in the skin tissue. Also, the needles used in the conventional microneedle rollers are thick needles having a circular cross section, so that, when pricking the skin with the needles, the needles pass through pain spots in the body, thus making user feel the pain.

To solve the above problems occurring, DTS MG created ‘Disk Needle Roller’ system – a circular disk of a drum is formed by integrating a metal disk having a plurality of needles. When pricking the skin with the disk needles, the needles do not give severe damage to the skin and can be prevented from being broken, thus being effectively used for a lengthy period of time.

The circular disks and the retainers of the drum have respective simple structures and are closely assembled with each other such that the disks and the retainers can be prevented from being undesirably moved relative to each other, thus realizing stable operation of the skin stimulator and preventing foreign substances from being jammed in the drum.

Shape of Needle

The circumferential surface of the drum is configured to form a polygonal cross-section of at least six sides instead of a circular cross section, so that, when pricking the skin with the needles, the contact surface of each needle relative to the skin can be reduced, thus minimizing the pain.

Number of Needles

GENOSYS Roller has 540 needles for 0.25mm (facial standard model), 450 needles for 0.5 / 1.0mm and 405 needles for 1.5 / 2mm (facial models) while other rollers have approximately 200 needles. With this feature, the treatment time can be shortened or we can create more micro channels for better effects than other rollers when we roll for the same period of time. With rolling for 10mins using 0.25mm standard width, approximately 500,000 micro channels can be created.

Thikness of Needles

The thickness of GENOSYS Roller is 0.2 mm which is the finest comparing to other rollers. Due to this feature, the pricking sensation is less painful than other rollers.